HANDICAP LIFTS & STEPS  
Elkhorn
Designed for budget concious facilities that have only occasional need for handicapped access. This easy to use manual hydrolic lift uses our standard corrosion resistant, stainless steel design. It is completely portable and remoles in seconds without tools. Unit comes with overhead bar, chains, sling, and anchor, 3 year structural warranty and 400 lb. rated load.



# 3553
# 3553-1
Econo-Lift
Additional Anchor
 

Back to List
Selway
Independence is now available with the new Freedom-Lift. this fully automatic, adjustable spa lift enables individuals to reap the benefits of hydrotherapy. The water powered drive system provides a smooth and dependable ride that is controlled by the user. It does not fasten to the spa and includes a pull-out leg support seatbelt, hose and anchors.



# 3554 Freedom-Lift 400
 

Back to List
Easy Ladder
Swimmers of all types can benefit from this innovative design. Elderly, arthritic, expectant mothers, young learners or anyone who is uncomfortablewith vertical ladders. Slip-resistant tread steps provide secure footing. Factory trimmed to fit your pool, comes with it's own separate dolly. Non-corrosive stainless steel rails and durable fiberglass construction.



# 3556 Easy Ladder
 

Back to List
Kalispell
This ramp provides quick and easy access for handicapped and ambulatory swimmers. All units are custom fitted for your pool and have a solid stainless steel structural assembly. The ramp surface is non-skid Duradeck wich is 36" wide. The handrails are 1.66" O.D. x 109" stainless steel and satisfy the federal ADAAG guidelines.



# 3555 Stainless Steel Ramp
 

Back to List
  New ADA Standard for Pool Access
Lifting capacity to be 300 lbs. the lift must sustain a static load of at least 900 lbs.

User must be able to operate the control mechanism from the edge of the lift's seat at both deck level and from the pool without assistance or delay.

Lift must rotate 180 degrees so that the seat is at least 12" inside of pool's edge.

Seat hight to be 17" high and 19" wide.

Lift must have inner transfer arms, flip up outer arm and footrest.

Vertical travel to allow seat to be submerged at least 18" into water.



 

Back to List
Pintlar
4 1/2" solid stainless steel cylinder lifts 400 lbs. at 55 PSI. Static tested at 1200 lbs. Strongest lift system available.
The seat rotates a full 180 degrees. It has a flip up outer arm and seatbelt for extra safety. Operating lever adjacent to seat in all positions. Adjustable footrest for added comfort and dual anchor poins with transport wheels.



# 3550
# 3552
Model 325; weight 130 lbs.
Optional Headrest
 

Back to List
Gallatin
The Model 350 deluxe package includes the same standard equipment as the Model 325 but also includes a headrest and rescue board assembly.



# 3551
# 3551-1
Model 350; weight 205 lbs.
Safety Cover; weight 8 lbs.
   

Back to List
   

Other Deck Equipment:
I Pool Ladders I Grab Rails & Recessed Steps I Flags I Posts I Stair Rails I Anchor & Ladder Accessories I Permanent Lifeguard Chairs I Portable Lifeguard Chairs I Diving Towers & Stands I Diving Boards I Diving Stands Boards & Platforms I Racing Lane Lines I Floats, Rope & Accessories I